2016 Upgraded Full Quality High Precision Reprap Prusa i3 DIY 3d Printer
Operation Environment: Good ventilation. No dust; Temperature: 15℃~35℃.
Relative humidity: 20%~80%( no condensation).
Storage Environment: Temperature: 0℃~40℃. Relative Humidity:
10%~80%(no condensation. Free of corrosive gas and clean.
Structure Sizes: 200mm*200mm*180mm (these are the maximum sizes. It is
advised to decrease practical sizes).
Input Voltage: 110V-220V
Applicable Operation System: Windows7/8(32-bit/64-bit)
Printing Raw Material: PLA
Raw Material Property: Special PLA designed for 3D printing (exclusive composition)
Layer Precision: 0.1mm-0.5mm
Positioning Precision: XY shafts, 0.011mm
Filament Diameter: Z shaft, 0.025mm
Nozzle Diameter: 0.4mm
Moving Shaft Speed: 30mm/s_100mm/s
Recommended Nozzle Moving Speed: 35-40 mm/s
Input File Type: stl
Cooling Method: Wind cooling
Maximum Temperature of Nozzle: 260℃（usually 210℃）
Maximum Temperature of Bed: 130℃(usually 65℃)
1.All assembly units
2.All assembly tools
4.1 Roll filament(ABS/PLA) (This printer is designed to fit 1.75mm filament, for it can melt more quicker.)
5. 2G SD cardRepRap Prusa i3 3D printer with LCD screen, you can adjust the printing parameters via the LCD screen rotary knob.