3D Printing Pen, Homecube 3D Drawing Printing Pen 3D Arts Craft Doodle Pen with LCD screen , Safety Holder and 3 Free 1.75 mm PLA Filament Refills / compatible with ABS/PLA Material(Black)
SAFETY AND WARNING INSTRUCTIONS:
The 3D printing pen is suitable for children over 6 years old and adult. Use by children must be under tutelage of adult.
To avoid clogging the filament feeder inside, please cut the ending tip portion of the filament where you stop, because the melted part need to be cut off so that you can smoothly insert it easily without any problem when you use it again.
Using Your 3D Pen:
Step 1:Connect the power adaptor to the back of the 3D pen and plug it into a power source. When the yellow LED turns on, the pen is in the preheat status.
Step 2:Press the “wire feeding” button, so the red LED turns on. After 30 seconds, the red LED will turn into green, preheating is done and the pen is ready.
Step3:Insert the ABS or PLA filament into the “wire loading hole” which is at the end of the pen. Keep on pressing the “wire feeding” button, the material will be loaded by built-in motor.
Hold till the plastic material comes out from the nozzle nip, so the material loading is finished.
Step4:Keep pressing the wire feeding button and draw your 3D objects. The speed of extrusion is adjustable by speed controller. Releasing the button will cause the pen to stop extruding.
Step5:When you want to unload or change the filament, you should press the wire unloading button, You may need to adjust the speed controller.
Product:HOMECUBE 3D painting Pen
Discharging mode: hot melt extrusion molding accumulation
Material: ABS / PLA
Spinning speed : Adjustable
Heating temperature in the range :160- 230 degrees Adjustable
Device operating voltage : 12V 3A
Nozzle Diameter: 0.7mm
1 x 3rd Generation 3D Printer Pen
1 x Power Adapter
3 x 3M PLA Printing Filament
1 x User manualSuitable for both kids and adults, it can help children improve spatial thinking ability; The pen increases the chances of intimate contact between parents and kids, makes the distance with their children much closer and makes the babies’ world much more colorful.