Excelvan Professional ABS 1.75mm Double Color 3D Filament Printing Materials Spool of 3D Printer Filament 1kg/2.2lbs With Tolerances: +/-0.02mm for RepRap MarkerBot MakerGear Ultimaker etc. (Yellow+Blue)
Get The Best Deal
See Special Price
This is the best filament on the market. The 1.75mm filament holds a diameter tolerance of 0.02mm/0.0008″ which improves reliability and quality of output and comes vacuum-sealed with the desiccant on a 1kg (2.2lb) reel. We tested many filaments at both 100-micron and 200-micron layer resolutions on FDM printers and found this one is the best.
ABS is made out of oil-based resources and it has a much higher melting point than PLA plastic. It’s also stronger and harder. It is an economical plastic notable for its low degree of shrinkage and warping. Because of these particular features, ABS is widely used for purposes ranging from car bumpers and motorcycle helmets to musical instruments, golfclubs
and branded building blocks.
1. 1x 3D printer filament
2. 1x leather box
1: PLA/ABS dual color filaments net weight: 1KG/2.2lbs, gross weight: 3.08lbs.
2: Flexible and PVA filaments are only used for short-range feeding 3D printer.
3: PVA filament should be kept in sealed, and PVA filament is only used as a support material. So, PVA must be used in double nozzles.
4: Print speed should be controlled in the range of 20-40mm/s while using wood、flexible or PVA filaments in ceae of print failure.
Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc