ANYCUBIC 3D PRINTER LCD Uv 405 nm Resin 500ml (White)

Get The Best Deal
£23.99 as at 19:14 UTC. (Details)

Parameter information: 
More Colors: Grey,Black,White,Transparent Green,Transparent Yellow
Main material: resin monomer & photo initiator
Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s

Resin parameters:
Solidify wavelength:405nm 
Hardness (D): 79.0 
Viscosity (25 ℃): 552.0 mpa.s 
Liquid density: 1.100 g / cm3
Solid density: 1.184 g / cm3 
Flexural strength:23.4 Mpa 
Tensile strength: 23.4 Mpa 
Elongation frequency:14.2 %
  Shelf life: 1 year 
Features: UV light will solidify the resin 

1. Storage method:
Keep away from light seals at room temperature.( Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light).
It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.
Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).

Professional LCD molding resin. ▶Optimize the formation of LCD low light source and printing efficiency is higher than the market compatible DLP / LCD / SLA resin. The resin is only designed for the LCD model of the resin, not recommended DLP or SLA machine.